Seamline

Lay it flat.
Press Measure.

Seamline measures a garment against spec in 5 seconds

Crew neck sweater, size M

1 of 6 out of tolerance

cm
  • Chest width53.9−0.1
  • Body length71.7+0.1
  • Sleeve length63.1+1.4
  • Across shoulder55.7+0.4
  • Bottom hem width34.4−0.2
  • Neck width20.7+0.1

How it works

  1. Choose the style and size

    Seamline reads the points of measure and tolerances from your tech pack.

  2. Lay the garment on the table

    The screen shows how each garment should lie.

  3. Press Measure

    Every point comes back in five seconds, accurate to 3 mm and checked against your tolerance.

The Seamline Workbench: a backlit table, a camera on a stand above it and a touchscreen on an arm clamped to a table leg.

The Workbench

The Workbench is where garments are measured. It is built from commercially available equipment, so lead times are short and costs are low.

  • Backlit tableThe garment shows as a sharp outline against the light.
  • Machine vision cameraOne photo from above is all Seamline needs.
  • TouchscreenThe operator chooses the style and presses Measure here.
  • QR code scannerScan a garment's tag to choose its style.
  • Mini computerRuns the station and sends each capture to Seamline.

Blog

See it measure your garments

Send us a note and we will set up a demo.

hello@seamlinetech.com